Hm Robot Vacuum Cleaner Rs 8034

Equipped with smart technologies, the Beko RS 8034 HM model robot performs the sweeping and wiping operations by itself. It makes cleaning practical with its special laser system and mobile application support. The Beko robot, which periodically sweeps and wipes the floors, ensures that the environment is always clean. The robot also has a mop mop feature. This feature, which is active on hard floors, makes cleaning flawless. The Beko RS 8034 HM robot vacuum cleaner, which is very easy to install and program, saves the plan of the space in its memory. The day, time and room selection can be made remotely for the machine to start working. At any time when you are not at home, you can operate the device remotely and have the house vacuumed and wiped.

Features of Beko RS 8034 HM Robot Vacuum Cleaner

The long-term performance of the Beko RS 8034 HM robot vacuum with a full charge draws attention. The product can clean for 150 minutes in low operating mode. This operating mode covers routine sweeping without any floor difference. The working time of the RS 8034 HM robot vacuum is about 5-6 hours. The robot, which has a 5200 mAh li-ion battery, goes to the charging station when it is finished and continues to charge the battery. The dust container of the product has a capacity of 0.45 liters and the water tank has a capacity of 0.18 liters. The robot vacuum works with 100-240 V input voltage. The average asset efficiency ratio is measured as 89.03%. If the battery of the product is reduced, there is no great loss in performance. It can be operated actively with remote control and phone application. At the same time, it exhibits a safe use with two protective filter systems.

Is Beko RS 8034 HM Robot Vacuum Cleaner Easy to Install?

Beko RS 8034 HM black robot vacuum can be activated in many different ways. The side sweeping brushes shipped with the machine are attached to the underside of the robot. The correct locations of the accessories are indicated on the machine. You can install the brushes by pressing them into these slots. It is necessary to position the charging unit close to the modem. The mobile application of the Beko RS 8034 HM robot vacuum makes the use of the product even more practical. You can give commands by following the correct steps through the application. To get efficient results, the surface of the room should be free of clutter. The robot starts cleaning from the charging station every time. For the installation of the machine, it is sufficient to plug the charger and connect the machine to the station. With the application installed on the mobile device, the robot's status information can be seen and directed.

Can Beko RS 8034 HM Robot Vacuum Reach Every Corner?

Beko RS 8034 HM robot vacuum moves by scanning the environment with its 360° sensor feature. It determines its own position and continues to scan as it progresses. It can be used successfully in different places with the feature of saving more than one map. The product is based on the charging station in the positioning phase. It provides a successful transition between floors with a carpet climbing height of 2 cm. With a total cleaning area of 200 m², the device practically sweeps the entire house. It detects hard floors and wipes them with a mop. According to Beko RS 8034 HM robot vacuum cleaner comments, the performance and mapping of the product are found to be successful. It manages to detect every point by making a new definition when the previously existing items are removed. Each surface determined by its special sensor is added to its memory.

Product features

• Warranty Period 2 Years
• Sound Level 61 Dba - 70 Dba
• Rechargeable Usage Time 120 min and over
• Power (Watts) 499-250 Watts
• Feature Robot
• Mapping Laser (LIDAR + SLAM)
• Warranty Type Official Distributor Guaranteed
• Number of Working Modes 3+
• Has Floor Wiping Feature
• Control via App
• Obstacle Level 2 cm
• Hopper Capacity 0-250 L